It makes neck and shoulder on the sleeves by injection processing. There is no operator needed to control or make the tube load in the mandrel.
The machine has sleeve storage and the operator put the sleeves in the storage from time to time. You can have a orifice
at which diameter you want after shoulder & neck is made without extra drill machine. It can apply to both round and oval shape tubes with
Orientation of I-mark.
It consist of 4-station, loading, injection, orifice cutting and unloading. Injection unit is divided 4 sectors with 4 mandrels.
Specification
GCH4000
• Max. output speed : 48pcs/min
• Tube dia.(mm) : 16~50
• Tube length : 60~200mm
• Extruder ø 60mm l For Outer Layer(PE)
• Tube dia l 16~60mm
• Tube length : 60~200mm
• Air consumption : 6~7kg/cm3, 500ℓ/min
• Elec. Power : 380V-3ph-50/60Hz, 20kw
• Dimension(mm) : W 2150 × L 4900 × H 1750
GCH6000/A/B
• Max. output speed : 72pcs/min
• Tube dia.(mm) : 25~50(GCH6000), 13.5~30(GCH6000A), 30~60(GCH6000B)
• Tube length : 60~200mm
• Air consumption : 6~7kg/cm3, 800ℓ/min
• Elec. Power : 380V-3ph-50/60Hz, 30kw
• Dimension(mm) : W 2350 × L 5500 × H 1850(GCH6000/GCH6000B)
W 2254 × L 5500 × H 1850(GCH6000A)
